|Home||» Products||» Injectable Powder Filling Machine||» Automatic Powder Filling Bunging Machine|
Automatic Powder Filling Bunging Machine
Automatic Powder Filling Bunging Machine is suitable to fill injectable powder into vials/bottles. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. All parts coming in contact with container, powder and rubber stopper or exposed to the atmosphere are made of stainless steel for long life, good house keeping and current good manufacturing practice (cGMP).
Compact GMP model.
No Vial No Filling system.
Multiple Dosing System.
±1% filling accuracy.
Built-in Rubber Stoppering Unit saves lot of space in the Sterile Area & reduces the length of Laminar Flow.
No stopper in chute, Machine stop system.
All motors are provided with appropriate contractors and relays for the protection against any overload or jamming.
Safety clutch system to avoid Bottle breakage.
Variable A.C. Frequency Drive for speed control.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
S.S. square pipe frame structure to avoid vibration.
All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.
Imported Gear Motor for Main drive, in feed and out feed table.
20 to 60 Fills/Minute
50 to 100 Fills/Minute
25mm to 80mm
20mm, 28mm & 30mm Butyl
5 gram to 50 grams in single dose with the help of change parts.
±1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh)
440 Volts, 3 Phase, 50 Hertz
Max. 2 Kg./Cm² Oil Free
25 Hg. @ 300 LPM Displacement
Pure Air Filter, Vacuum Pump
Oil Free Air Compressor
Online Pre-Media Filling Arrangement
Programmable Logic Control (System) with MMI
Aluminum Profile Cabinet covering full machine
2400mm (L) X 900mm (W) X 1800mm (H)
2600mm (L) X 900mm (W) X 1800mm (H)
(Dimension include main machine with 900mm in-feed turn table)
Note: Electrical characteristics can be adjusted as per customer's requirements.