|Home||» Products||» Vial Liquid Filling Machine||» Automatic Vial Filler|
Automatic Vial Filler
Automatic Vial Filler is suitable for the liquid filling and rubber stoppering injectable vials. Machine complete in pleasing matt finished stainless steel. The basic unit consists of turntable, S.S. Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built S.S. 316 Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.
The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots.
The incoming dry vial (sterilized and siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of S.S. 316 construction and both, glass as well as S.S. syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided
|No of Filling Head||Two||Four|
|Production Rate||30 to 60 Vials/Minute||60 to 120 Vials/Minute|
|Container Diameter:||15mm to 70mm||15mm to 70mm|
|Container Height:||25mm to 140mm||25mm to 140mm|
|Rubber Stopper:||13mm, 20mm & 28mm Butyl with the help of change part||13mm, 20mm & 28mm Butyl with the help of change part|
|Filling Range||2ml to 250ml||2ml to 250ml|
|Power Supply||1 H.P.||1 H.P.|
|Electrical Characteristics||380-440 Volts, 3 Phase, 50 Hertz, 4 Wire System||380-440 Volts, 3 Phase, 50 Hertz, 4 Wire System|
|Optional Accessories||Programmable Logic Control (System) with MMI||Programmable Logic Control (System) with MMI|
|-||Safety Cabinet covering full machine||Safety Cabinet covering full machine|
|Overall Dimension||1900mm(L) x 800mm(W) x 1680mm (H)||2000mm(L) x 850mm (W) x 1680mm (H)|
Note: Electrical characteristics can be adjusted as per customer’s requirements.
* Rights of technical improvement & modification reserved.
* Illustration & dimensions are shown for information purpose only.