Double Auger Powder Filling Machine

Next > >

<< Previous

Send Inquiry

Product Code : APF-80

Brand Name : Adinath

Product Description

Double Auger Powder Filling Machine

Double Auger Powder Filling Machine is uses for the filling and capping of dry syrup bottles in pharmaceutical industry. We are having different machine models suitable as per different customer requirements.

Salient Features:-


	Compact GMP model.

	No Bottle No Filling system.


	± 1% filling accuracy.


	All motors are provided with appropriate contractors and relays for the protection against any overload or jamming.

	Safety clutch system to avoid Bottle breakage.

	Variable A.C. Frequency Drive for speed control.

	All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.

	S.S. square pipe frame structure to avoid vibration.

	All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.

	Imported Gear Motor for Main drive, in feed and out feed table.


Process Operation:-


The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one.

Technical Specification:-

Model	APF-40	APF-80
Production Rate	15 to 35 Fills/Minute	30 to 80 Fills/Minute
Input Specification	-	-
Container Diameter	25mm to 100mm	25mm to 100mm
Fill Capacity	5 gram to 1000 grams	5 gram to 1000 grams
Filling Accuracy	± 2% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity	± 2% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity
Power Specification	2 H.P.	2 H.P.
Electrical Characteristics	440 Volts, 3 Phase, 50 Hertz	440 Volts, 3 Phase, 50 Hertz
Relational Humidity:	Below 28%	Below 28%
Optional Accessories	Pure Air Filter, Vacuum Pump	Pure Air Filter, Vacuum Pump
-	Oil Free Air Compressor	Oil Free Air Compressor
-	Online Pre-Media Filling Arrangement	Online Pre-Media Filling Arrangement
-	Programmable Logic Control (System) with MMI	Programmable Logic Control (System) with MMI
-	Aluminum Profile Cabinet covering full machine	Aluminum Profile Cabinet covering full machine
Overall Dimension:	1500mm (L) X 800mm (W) X 1500mm (H)	1800mm (L) X 800mm (W) X 1500mm (H)