|Eight Head Vial Filler|
is suitable for the liquid filling and rubber stoppering injectable vials. Machine complete in pleasing matt finished stainless steel. The basic unit consists of turntable, S.S. Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built S.S. 316 Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.
The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots.
The incoming dry vial (sterilized and siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of S.S. 316 construction and both, glass as well as S.S. syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided
No. of Filling Heads
120 to 250 Vials/Minute
15mm to 70mm
25mm to 140mm
13mm, 20mm & 28mm Butyl with the help of change parts
2ml to 250ml
440 Volts, 3 Phase, 50 Hertz, 4 Wire System
Programmable Logic Control (System) with MMI
Safety Cabinet covering full machine
3000mm(L) x 945mm (W) x 1680mm (H)
Note: Electrical characteristics can be adjusted as per customer’s requirements.
* Rights of technical improvement & modification reserved.
* Illustration & dimensions are shown for information purpose only.